Canon imagePRESS C7000VP Series, Trouble Shooting Information

Page: 46 / 137

Trouble Shooting Information for C7000VP series
Page 46
Rev. 2.0
2010/09/17

Field Remedy
As a measure for factory, the length of the cable is changed and the wire saddle is added.
This measure prevents stress to the end of the relay connector even when the cooling
fan slides.
If the issue occurs in the field, change the primary fixing separation fan cable into its new
type (FM2-8765-010) and take the following measure.
.

Technical Publication
TP10 068
1
）
As in P-2, secure the primary fixing separation fan cable [1] while placing the
tie-wrap [5] to the left of the wire saddle [4]. (The actual color of the cable is black.)
P-2 Primary fixing separation fan
[1] Primary fixing separation fan cable
[3] Fan
[4] Wire saddle
[5] Tie-wrap
2
）
As in P-3, connect the cable of the fan [3] with the primary fixing separation fan cable [1]
with the relay connector [2].
(Route the cable of the fan through the back of the relay connector.)
P-3 Primary fixing separation fan
[1] Primary fixing separation fan cable
[2] Relay connector
[3] Fan