![background image](http://html.mh-extra.com/html/canon/imageformula-dr-1210c/imageformula-dr-1210c_service-manual_62930082.webp)
5-2
COPYRIGHT © 2006 CANON ELECTRONICS INC. CANON DR-1210C FIRST EDITION FEB. 2006
CHAPTER 5 TROUBLESHOOTING
2) Hardware errors
The error messages from the driver are as listed below.
No. Message
Meaning
Primary
Measure
2-1
Paper Jam
The document is jamming. The
roller and/or the separation pad
are dirty.
Clean or replace the roller
and the separation pad.
2-2
Feeder is not
connected
Communications with the feeder
impossible. The ADF cable is
disconnected.
Connect the ADF cable.
Reset the power./Restart
the computer.
2-3
Scanner is
Locked
The scanner is locked by lock
switch in the reading unit. Or the
reading unit is in an abnormal
condition.
Release the lock switch.
Reset the power./Restart
the computer.
2-4
Calibration
Error
Failed in retrieval of shading
correction data.
Reset the power./Restart
the computer.
2-5
Lamp Error
The lamp is not lit. Light intensity
is abnormal.
Reset the power./Restart
the computer.
2-6
Hardware
Error
Unknown hardware abnormality
occurs.
Reset the power./Restart
the computer.
Table 5-102