COPYRIGHT © 2006 CANON ELECTRONICS INC. CANON DR-1210C FIRST EDITION FEB. 2006
3-9
CHAPTER 3 DISASSEMBLY & ASSEMBLY
3) Tighten the 2 screws
{
1
(M4
×
L10), 2
screws
{
2
(M4
×
L12, self-tapping), 4
screws
{
3
(M3
×
L6, self-tapping) and 2
screws
{
4
(M3
×
L10, self-tapping).
Then stick the 4 screw head seals
{
5
.
Note:
Use the correct screws in the correct
places. Be sure to stick the screw head
seals.
Figure 3-217
Replacement procedures
The new pressure board is required to be
stuck on the ADF bottom cover to the cor-
rect position to fit the reading glass.
Therefore the ADF bottom cover assigned
as a service part does not have the pres-
sure board stuck on it. Prepare both and
stick the pressure board on the ADF bot-
tom cover according to the following pro-
cedures.
1) Assemble the ADF bottom cover before
sticking the pressure board on it.
Note
: Be sure to stick the screw head seals.
