![background image](http://html.mh-extra.com/html/canon/imageformula-dr-1210c/imageformula-dr-1210c_service-manual_62930050.webp)
3-4
COPYRIGHT © 2006 CANON ELECTRONICS INC. CANON DR-1210C FIRST EDITION FEB. 2006
CHAPTER 3 DISASSEMBLY & ASSEMBLY
3) By turning the fitting parts
{
1
on the
feeder cover side, fit it to the notch
{
2
in
the feeder cover so that the fitting parts
can be easily unhooked. Straightly pull the
cover stopper
{
3
.
Figure 3-207
5. ADF Bottom Cover, ADF Front
Cover and Feeder Cover
Note:
During removal of the ADF bottom
cover, it is possible to remove the ADF
front cover and the feeder cover as well.
Note that the reassembling procedures
are different from the disassembling
procedures. The pressure board must
be installed to replace the ADF cover.
The following shows each procedure.
Disassembling procedures
1) Remove the pickup tray and the cover
stopper.
2) Remove the feeder (entire).
3) Facing the pressure board side upward,
put the removed feeder on a clean, stable
surface.