COPYRIGHT © 2006 CANON ELECTRONICS INC. CANON DR-1210C FIRST EDITION FEB. 2006
3-5
CHAPTER 3 DISASSEMBLY & ASSEMBLY
4) Peel off the 2 screw head seals
{
1
from
the sides of each of the right and left
hinges (4 seals in total).
Note:
As the screw head seals will be stuck
again later, do not lose them or soil the
sticking surfaces. If exposed, the screw
heads may induce static electricity,
possibly causing failures.
Figure 3-208
5) Remove the 2 screws
{
1
(M4
×
L10), 2
screws
{
2
(M4
×
L12, self-tapping), 4
screws
{
3
(M3
×
L6, self-tapping) and 2
screws
{
4
(M3
×
L10, self-tapping).
Note:
Since the types of the screws are dif-
ferent, take care to use them in the
correct places.
Figure 3-209
6) Lift up the ADF bottom cover
{
1
a little at
the hinge side.
Note:
This unhooks the fitting parts on one
side of feed cover.
Figure 3-210
