A-4
COPYRIGHT © 2006 CANON ELECTRONICS INC. CANON DR-1210C FIRST EDITION FEB. 2006
Appendix
III. SCRAPPING
When the product is discarded, it is re-
quired to remove the parts/units that contain
toxic substances. The fluorescent lamp in the
reading unit of this product contains mercury,
though slight amount. The lamp must be
removed in the procedures described below.
Refer to these procedures, in addition, if it
is required to separate the other parts of the
flatbed assembly for disposal.
Note:
Once the outer cover and the internal
parts of the flatbed assembly are re-
moved, the quality cannot be assured
even if reassembled. Disassemble the
flatbed assembly except the operation
panel only when discarding the product.
Never disassemble it in ordinary ser-
vicing work.
1. Fluorescent Lamp
1) Remove the feeder
{
1
. Refer to
“CHAPTER3, DISASSEMBLY &
REASSEMBLY” for details.
Figure A-301
2) Remove the 2 screws
{
1
from the hinge
insertion section.
Figure A-302
3) Remove the 4 screws
{
1
on the bottom
side.
Figure A-303