![background image](http://html.mh-extra.com/html/canon/imageformula-dr-1210c/imageformula-dr-1210c_service-manual_62930052.webp)
3-6
COPYRIGHT © 2006 CANON ELECTRONICS INC. CANON DR-1210C FIRST EDITION FEB. 2006
CHAPTER 3 DISASSEMBLY & ASSEMBLY
7) Face the feeder surface upward again.
Using a tool having a thin, flat tip, press
down the fitting parts
{
2
on the ADF front
cover
{
1
and unhook it. Make a gap be-
tween the ADF front cover and the ADF
top cover
{
3
.
Note:
Do not press down the fitting parts too
much. It may damage them.
Figure 3-211
8) Insert a tool having a thin, flat tip in the gap
{
1
around section A, slightly turn it and
unhook the fitting parts inside.
Then repeat the same action for section B
to enlarge the separation between the
ADF front cover and the ADF top cover.
Note:
Take care when carrying out this step
as the outer surface of the cover is
damaged easily. It is recommended to
wrap the tool tip with cloth and so forth
for the cover protection.
Protection
material
Figure 3-212