1
Programming Quick Guide
-DC9263A:
Wearable Scanner
Wearable Scanner:
Press the ring trigger to enable the scanner.
Installation
They are Plug &Play USB (HID) devices. When plugged into your Android
OTG devices, it can be recognized as barcode scanner and begin to scan
the barcode. Before using scanner, make sure the smartphone or tablet
is fully charged. Open your APP, they can work as a keyboard input.
Reset Configuration to Default :
If you are unsure of the scanner configuration or have scanned the
incorrect codes, please scan A1 to A2 for USB HID or B1 for RS232 or
USB Serial. This will reset the scanner to its factory defaults.
USB HID
RS232 / USB Serial.
A1
B1
A2
*Note
: Please install PL-2303 driver for USB serial
Keyboard Language (For USB HID only)
Scan the appropriate country code as below to program the
keyboard layout for your country or language. As a general
rule, the following characters are supported, but need special
care for countries other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
USA
(Original setting)
Italian
Norway
France
Germany
Vietnam
Sweden
Spain
Denmark
Portugal
Switzerland
Hungary
1D Symbologies – 1
ENABLE
CODABAR
DISABLE
ENABLE
Code 39
DISABLE
ENABLE
Code 32
DISABLE
ENABLE
Code 39
FULL ASCII
DISABLE
ENABLE
Interleaved 25
DISABLE
ENABLE
Code93
DISABLE
ENABLE
Matrix 25
DISABLE
ENABLE
IATA 25
DISABLE
