COPYRIGHT © 2006 CANON ELECTRONICS INC. CANON DR-1210C FIRST EDITION FEB. 2006
3-13
CHAPTER 3 DISASSEMBLY & ASSEMBLY
6) Remove the 2 screws
{
1
(M3
×
L6,
self-tapping) on the other side. Slowly lift
up the feed unit
{
2
(with motor) and re-
move it.
Figure 3-226
7) Remove the 2 screws
{
1
(M3 x L4) and
draw the feed motor
{
2
a little forward.
Then fit the motor gear to hole
{
3
and
remove the feed motor.
Figure 3-227
8) Remove the roller unit
{
1
and the separa-
tion pad
{
2
.
Note:
The feed unit (service part) does not
include the feed motor, the roller unit
and the separation pad.
Figure 3-228
Note:
When reassembling the feed unit, it
must be positioned at the correct place
and there must be no clearance. In
addition, lay the cable in the groove in
the cover to avoid it from being caught.