![background image](http://html.mh-extra.com/html/canon/imageformula-dr-1210c/imageformula-dr-1210c_service-manual_62930060.webp)
3-14
COPYRIGHT © 2006 CANON ELECTRONICS INC. CANON DR-1210C FIRST EDITION FEB. 2006
CHAPTER 3 DISASSEMBLY & ASSEMBLY
9. Eject Stopper
1) Open the eject stopper
{
1
.
While bending side
{
2
inward, unhook the
fitting parts
{
3
and remove the eject stop-
per.
Figure 3-229
10. Operation Panel
Note:
The operation panel is a component
included in the flatbed assembly.
When replacing it, be careful not to
make such foreign matters as paper
powder and dust fall into the flatbed
from gap. Do not remove any other
parts (upper cover, etc.) from the flat-
bed assembly.
1) Remove the 4 screws
{
1
(M3 x L6,
self-tapping) on the bottom side.
Figure 3-230