Canon ImageCLASS MF4690, Operation Manual

Page: 225 / 316

Troubleshooting
11-2
Clearing Jams
This section describes how to
remove jammed paper. When error
messages appear on the LCD display,
see “LCD Messages,” on p. 11-12.
For other troubles, see Chapter 10,
“Troubleshooting,” in the Reference
Guide, or Chapter 3, “Troubleshooting,”
in the Scanner Driver Guide.
When <CHECK DOCUMENT>, <PAPER
JAM/LIFT PANEL TO OPEN>, <FEEDER
PAPER JAM/CHECK THE FEEDER> or
<DOCUMENT TOO LONG> appears on
the LCD display, remove jammed paper
from the machine first, then from the
paper cassette or multi-purpose tray if
necessary. Check the following if you
experience repeated paper jams:
Fan and tap the paper stack on a
flat surface before loading it in the
machine.
Check that the paper you are using
meets the requirements for use. (See
“Paper Requirements,” on p. 2-9.)
Make sure you have removed any
scraps of paper from the inside of the
machine. –
–
–
When removing jammed documents or paper,
take care not to cut your hands on the edges of the
document or paper.
When removing jammed paper or when inspecting
the inside of the machine, do not allow necklaces,
bracelets, or other metal objects to touch the
inside of the machine, as this may result in burns or
electrical shock.
If you tear the paper, remove any torn pieces to
avoid further jams.
If loose toner comes into contact with your skin or
clothing, wash with cold water. Warm water will set
the toner.
Do not force a jammed document or paper out of
the machine. Contact Canon Customer Care Center if
needed.
–
–
–
–