Canon image Prograf iPF780 Series Service Manual Download Page 22

Page: 22 / 326

Chapter 1

1-12

1.5.2 Side

0031-2506

F-1-23

[1] Manual pocket

Store the printer manual in this pocket.

[2] Ethernet connector

Connect the Ethernet cable to this connector. The lamp lights when the Ethernet cable is connected properly and the printer is ready to communicate

accordingly.

[3] USB port

Connect the USB cable to this port. This port is compatible with the high-speed USB.

[4] Carrying handles

Three carrying handles provided at the left, right, and back allows three persons to carry the printer.

[5] Power receptacle

Plug the power cord into this receptacle.

[4]

[1]

[5]

[4]

[2]

[3]

Summary of Contents for image Prograf iPF780 Series







































































































































































































































































































































Search results

Summary of Contents for image Prograf iPF780 Series

Reviews:

Related manuals for image Prograf iPF780 Series

Brands by name

Popular brands

Canon image Prograf iPF780 Series, Service Manual

Search results

Summary of Contents for image Prograf iPF780 Series

Reviews:

Related manuals for image Prograf iPF780 Series

Brands by name

Popular brands