Canon image Prograf iPF780 Series Service Manual Download Page 108

Page: 108 / 326

Chapter 2

2-49

2.5 Detection Functions with Sensors

2.5.1 Covers

0023-2554

F-2-37

Upper cover lock switch

The microswitch-based upper cover lock switch detects the open/closed states of the upper cover.

When the upper cover close, the switch is pressed to detect the closed state of the upper cover.

Ink tank cover switch (L)/(R)

The microswitch-based ink tank cover switches detect the open/closed states of left and right ink tank cover.

When an ink tank cover closes, the switch is pressed to detect the closed state of the ink tank cover.

Ink Tank Cover Switch (L)

Ink Tank Cover Switch (R)

Upper Cover Lock Switch

Summary of Contents for image Prograf iPF780 Series







































































































































































































































































































































Search results

Summary of Contents for image Prograf iPF780 Series

Reviews:

Related manuals for image Prograf iPF780 Series

Brands by name

Popular brands

Canon image Prograf iPF780 Series, Service Manual

Search results

Summary of Contents for image Prograf iPF780 Series

Reviews:

Related manuals for image Prograf iPF780 Series

Brands by name

Popular brands