Canon G4200, Online Manual

Page: 386 / 467

Printing Does Not Start
Check1
Make sure printer is securely plugged in and press
ON
button to turn it on.
The
POWER
lamp flashes while the printer is initializing. Wait until the
POWER
lamp stops flashing and remains
lit.
Note
• If you are printing large data such as photos or other graphics, printing may take longer to start. The
POWER
lamp flashes while the computer is processing data and sending it to the printer. Wait until printing
starts.
Check2
Make sure printer is properly connected to computer.
If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When the
USB cable is securely plugged in, check the following:
• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the
computer, and retry the printing. If printing starts normally, there is a problem with the relay device. Contact
the vendor of the relay device.
• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.
If you use the printer over a LAN, make sure the printer is correctly set up for network use.
Note
• For Windows: If you can use IJ Network Device Setup Utility, check the network connection status.
Check3
Make sure paper settings match information set for rear tray.
If the paper settings do not match the information set for the rear tray, an error message appears on the LCD.
Follow the instructions on the LCD to solve the problem.
Note
• You can select whether the message which prevents misprinting is displayed.
• To change the message view setting when printing or copying using the printer's operation panel:
Device user settings
• To change the message view setting when printing using the printer driver:
Changing the Printer Operation Mode (Windows)
Changing the Printer Operation Mode (Mac OS)
Check4
If printing from a computer, delete unnecessary print jobs.
• For Windows:
386