Canon G4200, Online Manual

Page: 73 / 467

Cleaning Paper Feed Rollers
If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.
In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only
when necessary.
You need to prepare: three sheets of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Remove any paper from the rear tray.
3. Press the
Setup
button, use the button to select
Maintenance
, and press the
OK
button.
LCD and Operation Panel
4. Use the button to select
Roller cleaning
and then press the
OK
button.
The paper feed roller will rotate as it is cleaned.
5. Make sure that the paper feed roller has stopped rotating, then load three sheets of A4 or
Letter-sized plain paper in the rear tray.
After loading paper on the rear tray, the paper information registration screen appears on the LCD.
Select
A4
or
Letter
for
Size:
and
Plain paper
for
Type:
and then press the
OK
button.
6. Pull out the paper output tray, then open the output tray extension.
7. Make sure that
Roller cleaning
is selected and press the
OK
button.
The printer starts cleaning. The cleaning will be complete when the paper is ejected.
If the problem is not resolved after cleaning the paper feed roller, contact the service center.
73