Canon 7086 Series, Service Manual

Page: 88 / 735

Chapter 2
2-30
1) Slide out the duplexing unit, and check to make sure there is no foreign
matter and damage.
2) Check to make sure that the main power switch is at OFF; then, connect
the machine's power plug to the power outlet.
3) Turn on the main power switch by shifting it to ON.
- A screen appears indicating that programs are being loaded.
- A message appears indicating that the machine is starting up.
2.2.14 Stirring the Toner
0011-1246
iR7105 / iR7095 / iR7086
When the wait period is over, start service mode to supply toner to the devel-
oping unit.
1) Start service mode. ( > '2' and '8' at the same time > )
2) Make the following selections: COPIER > FUNCTION > INSTALL >
TONER-S.
3) See that the following message has appeared: "Check the Developer."
4) Check to see that the developing assembly is mounted properly; then,
press the OK key.
- The supply operation lasts about 8 to 10 min, and stops automatically.
(At the end of the operation, the message "STOP!" appears.)
5) End service mode.
2.2.15 Stirring the Toner
0012-2467
iR7095P
When the wait period is over, start service mode to supply toner to the devel-
oping unit.
1) Start service mode. ( > '2' and '8' at the same time > )
2) Make the following selections: COPIER > FUNCTION > INSTALL >
TONER-S.
3) See that the following message has appeared: "Check the Developer."
4) Check to see that the developing assembly is mounted properly; then,
press the OK key.
- The supply operation lasts about 8 to 10 min, and stops automatically.
(At the end of the operation, the message "STOP!" appears.)
5) End service mode.
2.2.16 Index Sheet Attachment
0010-8965
iR7105 / iR7095 / iR7086 / iR7095P
1) Choose cassette 1 or 2 for use with index sheets.
Press the release button of the cassette you have chosen, and slide out the
cassette.
Match the 2 one-touch supports [1] against the holes [2] of the cassette,
and fit in the pins to attach.
2) Holding it so that the protrusion is at the top, match the hole in the index
sheet attachment [3] against the one-touch support [1].
3) Place the base sheet [4] into the cassette, and put the cassette back into the
machine.
F-2-120
2.2.17 Others
0011-9786
iR7105 / iR7095 / iR7086
<Shut-Down Caution Label>
1) Affix the shut down instruction label [1] in the appropriate language on
the indicated position.
F-2-121
iR7086 Only
<Cleaning Position Label>
1) Fit the Cleaning Position label [1] as indicated on the front cover, and at-
tach it in place.
F-2-122
<Original Size Label>
1) Fit the Original Size label [1] as indicated on the ADF open/close cover,
and attach it in place.
Be sure to remove all packing material from inside the cassette before
turning on the main power.
Do not perform the following while the machine is in operation:
- turning off the power
- opening/closing the ADF
- opening/closing any of the various covers
- opening/closing the cassettes
- opening/closing the deck
Do not perform the following while the machine is in operation:
- turning off the power
- opening/closing any of the various covers
- opening/closing the cassettes
- opening/closing the deck
[2]
[3]
[4]
[1]
[1]
ON
[1]
[1]