manualshive.com logo in svg

Canon 7086 Series, Service Manual

Share
Download
Canon 7086 Series Service Manual Download Page 721

Chapter 18  

18-34

F-18-54

5) While downloading is under way, the control panel screen shows its progress. At the end of downloading, a message will appear asking you to press a key. Press

the appropriate key. If the machine is in normal mode, it starts the shut-down instructions.

F-18-55

6) When a message appears asking you to turn off the power, turn off the main power switch, remove the USB device, and turn on the main power switch.
7) Upon start-up, the machine starts to write the system software to the system area of the HDD or the flash ROM. At the end of writing to the HDD, a message

will appear asking you to turn off and then back on the power. Turn off and then back on the main power switch.

F-18-56

18.4.5.5 Downloading the System Software (overwriting)

0011-6780

iR7105 / iR7095 / iR7086

[3]: Upgrade (Overwrite all)

The system software in the USB device will overwrite the software on the HDD regardless of the version of the latter. Unlike menu item [1], however, the machine
will not restart on its own at the end of downloading. When the power is turned off and then back on manually, the machine starts writing the system software.

<Procedure>

1) If the machine is on, go through the HDD shut-down instructions, and turn off the main power.
2) Connect the USB device to the USB port.
3) Put the machine in download mode (normal or safe).
4) Go through the instructions on the control panel, and press the appropriate key.

[3] -> [0]: 

execute download   /   other that [0]: go back to Menu screen

Summary of Contents for 7086 Series
































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands