manualshive.com logo in svg

Canon 7086 Series, Service Manual

Share
Download
Canon 7086 Series Service Manual Download Page 374

Chapter 9  

9-18

F-9-55

Check the fixing cleaning belt for skew, wrapping, and wrinkling. Further,
be sure that the winding direction and the mounting orientation are as indi-
cated.

F-9-56

2) After mounting the fixing cleaning belt, move the plunger [4] of the clean-

ing belt feeding solenoid into the direction of the arrow.

F-9-57

If you have replaced the cleaning belt, be sure to return the setting under
COPIER > COUNTER > MISC > FIX-WEB to '0' in service mode.

9.5.11 Claw Jam Sensor

9.5.11.1 Removing the Claw Jam Sensor

0010-9540

iR7105 / iR7095 / iR7086

1) Remove the fixing assembly.

2) Remove the 2 screws, and detach the lower separation claw assembly.
3) Detach the claw jam sensor [1] from the right side of the lower delivery
assembly.

F-9-58

9.5.12 External Delivery Sensor

9.5.12.1 Remove the External Delivery Sensor

0010-9543

iR7105 / iR7095 / iR7086

1) Remove the external delivery roller.

2) Remove the 2 screws [1], and disconnect the connector [2]; then, de-
tach the external sensor assembly [3].

F-9-59

3) Disconnect the connector [1], and detach the external delivery sensor [2].

F-9-60

9.5.13 Internal Delivery Sensor

9.5.13.1 Removing the Internal Delivery Sensor

0010-9545

iR7105 / iR7095 / iR7086

1) Remove the fixing assembly.

2) Open the upper delivery assembly, and remove the 2 screws [1]; then,
detach the internal delivery sensor assembly [2].

F-9-61

3) Disconnect the connector [1], and detach the internal delivery senor [2].

[3]

[1]

[2]

Take up roller

Cleaning belt
feeding roller 

[4]

[1]

[1]

[1]

[3]

[2]

[1]

[2]

[2]

[1]

[1]

Summary of Contents for 7086 Series
































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands