Canon 7086 Series, Service Manual

Page: 667 / 735

Chapter 17
17-79
<CST>
T-17-49
<ACC>
T-17-50
SNMP-COA
*** SNMP access restriction switch for internal community name (administrative privilege)
2
Restrict the SNMP access regarding the internally obtained community name (administrative privilege).
Setting range
0: OFF
1: ON (Read only)
2: ON (Read/Write available) [default]
Usually the SNMP community name can be set using the following item; [Additional Functions]>[System Settings]>[Network
Settings]>[SNMP Settings]. There is an internal community name (administrative privilege) in addition to the community name that is
set in the above item, and it is used at the time of access using the Canon utility software such as NetSpot.
In the case that the SNMP access using an internal community name needs to be restricted in view of security, set this item to "0" or "1".
SNMP-COU
*** SNMP access restriction switch for internal community name (user privilege)
2
Restrict the SNMP access regarding the internally obtained community name (user privilege).
Setting range
0: OFF
1: ON (Read only)
2: ON (Read/Write available) [default]
Usually the SNMP community name can be set using the following item; [Additional Functions]>[System Settings]>[Network
Settings]>[SNMP Settings]. There is an internal community name (user privilege) in addition to the community name that is set in the
above item, and it is used at the time of access using the Canon utility software such as NetSpot.
In the case that the SNMP access using an internal community name needs to be restricted in view of security, set this item to "0" or "1".
COPIER > OPTION > CST
Sub item Description Sub item
P-SZ-C1/C2 Use it to select the size of the paper used in the front deck (C1: right deck; C2: left deck).
1
settings
6: A4 (default); 15: B5; 18: LTR
U1-NAME
to U4-NAME Use it to enable/disable indication of the paper name when paper of a particular size group (U1 through U4) is detected.
2
settings
0: indicate 'U1, U2, U3, U4' on touch panel (default)
1: indicate paper name set in service mode (CST-UI, U2, USE, U4)
CST-U1 Use it to specify the name of paper used in a paper size group (U1).
2
When any of the following special size papers is set for U1, the paper may be used as a special size paper for U1 (universal cassette).
settings
22: K-LGL; 31: Government LETTER (default)
CST-U2 Use it to specify the name of paper used in a paper size group (U2).
2
When any of the following special size papers is set for U2, the paper may be used as a special size paper for U2 (universal cassette).
settings
24: Foolscap (default); 26: Officio; 27: Ecuadorian Officio; 33: Argentine Legal; 36: Argentina Officio; 37: Mexican Officio
CST-U3 Use it to specify the name of paper in a paper size group (U3).
2
When any of the special size papers is specified for U3, the paper may be used as a special size paper for U3 (universal cassette).
settings
25: Australian Foolscap; 34: Government Legal (default); 35: Folio
CST-U4 Use it to specify the image of paper used in a paper size group (U4).
2
When any of the following special size papers is set for U4, the paper may be used as a special size paper for U4 (universal cassette).
settings
18: LTR (default); 29: Argentine Letter
COPIER > OPTION > ACC
***: up graded version
Sub item Description Level
COIN Use it to set the coin vendor mechanism.
1
settings
0: coin vendor not used (default); 1: coin vendor used; 2: remote counter
DK-P Use it to specify the size of the paper in the side paper deck (small).
1
settings
0: A4 (default); 1: B5; 2: LTR
PD-SIZE Use it to specify the size of the paper in the side paper deck (large).
1
settings
0: as set in user mode (default); 22: Korean Government; 23: Korean Government-R; 24: Foolscap; 25: Australian Foolscap; 26:
Officio; 27: Ecuadorian Officio; 28: Bolivian Officio; 29: Argentine Letter; 30: Argentine Letter-R; 31: Government Letter; 32:
Government Letter-R; 33: Argentine Legal; 34: Government Legal; 35: Folio; 36; Argentine Officio; 37: Mexican Officio
This mode item is indicated only when a large paper deck is connected.
COPIER > OPTION > USER
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
***: up graded version
Sub item Description Level