Canon 7086 Series, Service Manual

Page: 48 / 735

Chapter 1
1-18
Laser light can be harmful to the human body. The machine's laser system is completely blocked by means of a protective housing and external covers, and its light
will not escape outside the machine as long as it is used for its intended purposes.
1.2.4.2 CDRH Regulations
0010-7423
iR7105 / iR7095 / iR7086
The Center for Devices and Radiological Health of the US Food and Drug Administration put into effect regulations to govern laser products on August 2, 1976.
These regulations apply to laser products manufactured on and after August 1, 1976, and all laser products must be certified under the regulations for sale within
the United Sates.
The following shows the label used to certify compliance with the CDRH regulations, and laser products intended for sale in the US are required to bear this label.
F-1-12
The text on the label may differ among product models.
1.2.4.3 Handling of the Laser Assembly
0010-7424
iR7105 / iR7095 / iR7086
Take full care when servicing the area around the laser scanner system, as by avoiding bringing a reflective tool (e.g., screwdriver) into the laser path and removing
watches and rings before starting the work. (These items are likely to reflect the laser light, and exposure to laser light can permanently damage the eye.)
The machine uses red laser light, and its covers that possibly reflect the light are identified by an appropriate label. Be sure to take extra care if you must service
the area behind any of these covers.
A cover used to block laser light is identified by the following label:
CANON
MANUFACTURED:
30-2, SHIMOMARUKO, 3-CHOME, OHTAKU, TOKYO,
146, JAPAN.
THIS PRODUCT CONFORMS WITH CQRH RADIATION
PERFORMANCE STANDARD 21CFR CHAPTER 1
SUBCHAPTER J.