Canon 7086 Series, Service Manual

Page: 655 / 735

Chapter 17
17-67
BK-BD-1 to BK-
BD-12 Use it to set the month-based black band sequence mode (January to December).
2
As a countermeasure of light density, set a black belt sequence (toner ejecting sequence)
settings
0: do not execute if absolute moisture content is less than 9 g; if 9 g or more, execute every 200 prints (default); 1: execute every 60
prints; 2: execute every 20 prints; 3: execute every 6 prints
MEMO:
-This is not used for servicing normally.
PAPER-TY Selection of fixing temperature control and pre-transfer exposure ON/OFF control suitable for media (Inside/Outside Japan)
2
Settings
0: Control by factory default settings suitable for each destination (A-, AB-, Inch-, AB/Inch-configuration) (default)
1: Control as media for inside Japan
2: Control as media for outside Japan
MEMO:
By changing the value as '1', setting is forcibly changed to control suitable for inside Japan, and for outside Japan by '2'.
SMTPTXPN Use it to change the SMTP transmission port number.
2
settings
0 to 6535 (default: 25)
SMTPRXPN Use it to change the SMTP transmission port number.
2
settings
0 to 65535 (default: 25)
POP3PN Use it to change the POP reception port number.
2
settings
0 to 6535 (default: 110)
RUI-DSP Use it to set the copier function option switch of the remote UI (for compliance with disability laws).
2
settings
0: do not show copier screen for remote UI (default); 1: display
ORG-LGL Use it to set special paper sizes (not recognized when the ADF is in use).
2
settings:
*
0: Legal-R (default); 1: Bolivian Officio-R; 2: Argentine Officio-R; 3: Argentine Legal-R; 4: Mexican Officio-R
**
0: Legal-R; 1: Foolscap-R; 2: Officio-R; 3: Folio-R; 4: Australian Foolscap-R; 5: Ecuadorian Officio-R; 6: Bolivian Office-R; 7:
Argentine Officio-R; 8: Argentine Legal-R; 9: Government Legal-R; 10: Mexican-R
ORG-LTR Use it to select special paper sizes (not recognized when the ADF is in use).
2
settings
*
0: Letter (default); 1: Executive; 2: Korean Government; 3: Argentine Letter; 4: Government Letter
**
0: Letter (default); 1: Executive; 2: Argentine Letter; 3: Government Letter
ORG-B5 ** Use it to set a special paper size (not recognized when the ADF is in use).
2
settings
0: B5 (delay); 1: Korean Government
UI-COPY Use it to enable/disable display of the copier screen on the control panel.
2
settings
0: do not display; 1: display (default)
UI-BOX Use it to enable/disable display of the box screen on the control panel.
2
settings
0: do not display; 1: display (default)
UI-SEND Use it to enable/disable display of the transmission screen on the control panel.
2
settings
0: do not display; 1: display (default)
UI-FAX not used 2
UI-EXT Use it to enable/disable display of the extension screen on the control panel.
2
settings
0: do not display; 1: display (default)
COPIER > OPTION > BODY
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
***: up graded version
Sub item Description Level