Canon 7086 Series, Service Manual

Page: 490 / 735

Chapter 13
13-8
4) Move the waste toner collecting in front of the magnet roller [1] and the scraper [2] using a piece of paper [3] in the direction of the feedscrew (rear).
F-13-4
5) Release the 2 locks [1] of the slide rail, and slide the fixing/transport unit [2] farther toward the front.
F-13-5
6) With the cleaner assembly [1] slid halfway out, remove the screw [2] (1 pc. each), and detach the 2 toner receptacle fixing plates [3].
7) Remove the front toner receptacle [4], and remove the toner from the front toner receptacle.
F-13-6
8) Slide the cleaner assembly [1] fully out, and remote the screw [2] (1 pc. each); then, detach the 2 toner receptacle fixing plates [3].
9) Remove the rear toner receptacle [4], and remove the toner from the rear toner receptacle.
[1]
[2]
[3]
[1]
[1]
[2]
[1]
[2] [4]
[3]
[2]