manualshive.com logo in svg

Canon 7086 Series, Service Manual

Share
Download
Canon 7086 Series Service Manual Download Page 347

Chapter 8

8-47

8.11.22.3 Removing the Front Cover of the Duplexing 

Unit

0010-9341

iR7105 / iR7095 / iR7086

1) Remove the 4 screws [1] and the knob [2]; then, detach the front cover [3].

F-8-127

8.11.22.4 Removing the Duplex Left Feed Motor

0010-9346

iR7105 / iR7095 / iR7086

1) Remove the duplex feed fan unit.

2) Loosen the screw [1]; then, while pulling the tension support plate [2]
in the direction of the arrow, tighten the screw [1] (to loosen the tension
of the belt [3]).
3) Disconnect the connector [4], and remove the 2 screws [5]; then, de-
tach the duplex left feed motor [6].

F-8-128

8.11.22.5 Removing the Duplex Right Feed Motor

0010-9349

iR7105 / iR7095 / iR7086

1) Remove the front cover of the duplex unit. (4 screws, 3 knobs)

2) Loosen the screw [1]; then, while pulling the tension support plate [2]
in the direction of the arrow, tighten the screw [1] (to loosen the tension
of the belt [3]).
3) Disconnect the connector [4], and remove the 2 screws [5]; then, de-
tach the duplex right feed motor [6].

F-8-129

8.11.22.6 Removing the Reversing Flapper Solenoid

0010-9355

iR7105 / iR7095 / iR7086

1) Remove the duplexing unit from the main body.

2) Remove the two screws [1], and disconnect the connector [2]; then, de-
tach the reversing flapper solenoid [3].

F-8-130

8.11.22.7 Removing the Left Deck Feed Sensor

0010-9360

iR7105 / iR7095 / iR7086

1) Slide out the duplex unit assembly.

2) Remove the screw [1], and detach the sensor base [2].

F-8-131

3) Disconnect the connector [1], and free the claw to detach the left deck feed

sensor [2].

F-8-132

When removing the scanner sensor, be sure to remove the paint used to lock
the claw in place in advance to prevent breaking the claw. When mounting
it, be sure the claw is not displaced or the sensor is not disoriented.

8.11.22.8 Removing the Horizontal Registration Motor

0010-9361

iR7105 / iR7095 / iR7086

1) Remove the duplexing unit from the main body.

2) Remove the two screws [1], and detach the upper cover [2].

[3]

[2]

[1]

[1]

[3]

[1]

[6]

[5]

[2]

[4]

[1]

[6]

[5]

[5]

[2]

[4]

[3]

[1]

[1]

[2]

[3]

[1]

[2]

[2]

[1]

Summary of Contents for 7086 Series
































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands