Canon 7086 Series, Service Manual

Page: 595 / 735

Chapter 17
17-7
<ANALOG>
T-17-3
<CST-STS>
T-17-4
PDL-FNC1/2 Use it to indicate the state (enabled/disabled) of the PDL function:
0000 0000 0000 0000 - 1111 1111 1111 1111 (0: OFF, 1: ON)
for PDL-FNC1, b31 thorough b16
for PDL-FNC2, b15 thorough b0
b31: BDL, b30: PS, b29: PCL, b28: PDF, b27: LIPS, b26: N201, b25: I5577, b24: ESC/P, b23: HPGL, b22: HPGL2, b21:
IMAGING, b20: KS, b19 through b0: for future use
1
HDD Use it to indicate the model name of the HDD. 1
OVLP-UNT Use it to indicate the connection of a double-feeding detection unit.
0: not connected; 1: connected
1
PCI1/2/3 Use it to indicate the board name of PC1/2/3.
if not connected: - (hyphen)
if connected: board name
<board name>
Voice Board: voice guidance board
3DES Board: security expansion board
1
USBH-SPD Use it to indicate the connection of the USB device.
2
COPIER > DISPLAY > ANALOG
Sub item Description Level
TEMP machine inside temperature (environment sensor); unit: deg C 1
HUM machine inside humidity (environment sensor); unit: %RH 1
ABS-HUM water content (environment sensor); unit: g 1
FIX-C fixing roller surface temperature (main thermistor): unit: deg C 1
FIX-E fixing roller edge surface temperature (sub thermistor); unit: deg C 1
COPIER > DISPLAY > CST-STS
Sub item Description Level
WIDTH-C3 indicates the paper width of cassette3 in terms of paper size; unit: mm 2
WIDTH-C4 indicates the paper width of cassette 4 in terms of paper size; unit: mm 2
WIDTH-MF indicates the paper width size of the manual feeder tray; unit: mm 2
COPIER > DISPLAY > ACC-STS
Sub item Description Level