manualshive.com logo in svg

Canon 7086 Series, Service Manual

Share
Download
Canon 7086 Series Service Manual Download Page 475

Chapter 12

12-5

Log detailed screen

F-12-3

Detailed information of individual communication test error is displayed.
Refer to the displayed message to "Error message list".
It shifts to "Log list screen" by the [OK] button pressing.
Maximum length of error information: 128 characters (not include NULL)

12.1.9 Sleep operation

0011-6839

iR7105 / iR7095 / iR7086 / iR7095P

When there is a method that should be transmitted while e-RDS is operating (ON), e-RDS wakes from the state of sleep and begins transmitting.

12.1.10 Network Setting (Maintenance)

0011-6840

iR7105 / iR7095 / iR7086 / iR7095P

You should do the network setting of Device appropriately before the e-RDS setting.
A. Display the Additional Functions screen.

-  Press [Additional Functions (*)] key.
-  Input ID code.

B. Display the TCP/IP Settings screen.

-  Select (touch) [System Settings] > [Network Settings] > [TCP/IP Settings] on the Touch Panel Display.

C. Setting of items related to IP address

-  Select (touch) [IP Address Settings] => IP Address Settings screen is displayed.
-  Set each items such as IP Address, Subnet Mask, Gateway Addresses, and DHCP, etc.
-  Return to the TCP/IP Settings screen by pushing the [OK] button after the setting ends.

D. DNS Settings

-  Select (touch) [DNS Settings] => DNS Settings screen is displayed.
-  Set necessary items.
-  Return to the TCP/IP Settings screen by pushing the [OK] button after the setting ends.

E. Proxy Settings

-  Select (touch) [Proxy Settings] (Press Down arrow button until [Proxy Settings] is displayed on the TCP/IP Settings screen.) => Proxy Settings screen is
displayed.
-  Set necessary items.
-  Return to the TCP/IP Settings screen by pushing the [OK] button after the setting ends.

F. Display the normal screen.

-  Press [Additional Functions (*)] key pressing or press [Done] button to a necessary frequency.

12.1.11 e-RDS Setting (Maintenance)

0011-6841

iR7105 / iR7095 / iR7086 / iR7095P

A. Display the Menu screen of e-RDS from the service mode.
A-1. Shift to the service mode

Summary of Contents for 7086 Series
































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands