Can-Am Commander Electric LSV, Operator'S Manual

Page: 45 / 114

PRIMARY CONTROLS
tmo2013-007-008_a
1. Shift lever
2. Park
3. Reverse
4. Neutral
5. High range (forward)
6. Low range (forward)
The vehicle must be stopped and
brakes applied prior to changing shift
lever position.
NOTICE
This gearbox is not de-
signed to shift while vehicle is mov-
ing.
Park (P)
The park position engages the electric
parking brake to help prevent vehicle
movement.
WARNING
Always use the PARK (P) position
when the vehicle is not in oper-
ation. The vehicle can roll if the
shift lever is not set to P (PARK).
Reverse (R)
The reverse position allows the vehicle
to go backwards.
NOTE: In reverse operation, the mo-
tor's RPM is limited, thus limiting
the vehicle reverse speed to approx-
imately 20 km/h (12 MPH).
WARNING
When driving downhill in reverse,
gravity can increase the vehicle
speed above the set limited re-
verse speed.
Neutral (N)
The neutral position disengages the
parking brake and the regen.
WARNING
The vehicle can roll in the N posi-
tion.
High Range (Forward)
This is the normal forward position. It
allows the vehicle to reach its maxi-
mum speed of approximately 40 km/h
(25 MPH).
Low Range (Forward)
In the low range position, the vehicle
maximum speed is limited to approxi-
mately 15 km/h (9 MPH).
During deceleration, this position helps
reducing vehicle speed and also gives
the maximum battery regeneration.
NOTICE
Use the low speed range
to pull a trailer, carry heavy cargo or
drive downhill.
42
______________