Can-Am Commander Electric LSV, Operator'S Manual

Page: 49 / 114

SECONDARY CONTROLS
NOTE: By default the rear differen-
tial is unlocked when power switch is
turned from the OFF position to the
ON position.
To Lock Rear Differential
Stop vehicle.
With the power switch to ON position,
press the differential lock switch.
NOTE: Above 2.5 km/h (2 MPH), the
differential lock switch cannot be acti-
vated.
To Unlock Rear Differential
Stop vehicle.
Press the differential lock switch
NOTE: Above 2.5 km/h (2 MPH), the
differential lock switch cannot be acti-
vated.
7) Winch Switch (Option)
The winch can be controlled from in-
side the vehicle with the winch control
switch located in the upper console.
tmo2012-005-044_g
TYPICAL
1. Winch switch
The winch also comes with a remote
control located in the glove box.
tmo2011-001-506_a
TYPICAL
1. Remote control
Refer to your BASIC GUIDE TO
WINCHING TECHNIQUES
included
with your vehicle for proper winch op-
eration.
NOTE: Extensive use of the winch will
discharge the batteries and reduce the
vehicle autonomy.
8) Wiper Switch
Models with Glass Windshield
tmo2013-007-001_b
1. Wiper switch
The wiper switch is located on the top
near roll cage.
Press on the wiper switch to activate
wiper.
Depress on the wiper switch to stop
wiper.
46
______________