Can-Am Commander Electric LSV, Operator'S Manual

Page: 85 / 114

MAINTENANCE PROCEDURES
tmo2012-005-008_a
TYPICAL
Wheels and Tires
Wheel Removal
Loosen nuts then lift and support vehi-
cle. Refer to
LIFTING AND SUPPORT-
ING VEHICLE
in
VEHICLE INFORMA-
TION
.
Remove nuts then remove wheel.
Wheel Installation
At installation, it is recommended to
apply anti-seize lubricant on threads.
The tires are unidirectional and their ro-
tation must be kept in a specific direc-
tion for proper operation.
Torque wheel nuts in accordance with
the following illustration.
TORQUE
Wheel lug
nuts
100 N•m ± 10 N•m
(74 lbf•ft ± 7 lbf•ft)
tmo2011-001-081_a
TYPICAL - TIGHTENING SEQUENCE
NOTICE
Always use the recom-
mended wheel nuts for the type of
wheel. Using a different nut could
cause damages to the rim or studs.
Tire Pressure
WARNING
Tire pressure greatly affects vehi-
cle handling and stability. Under
pressure may cause tire to deflate
and rotate on wheel. Overpres-
sure may burst the tire. Always
follow recommended pressure.
Check pressure when tires are cold
before using the vehicle. Tire pres-
sure changes with temperature and
altitude. Recheck pressure if one of
these conditions has changed.
For your convenience, a pressure
gauge is supplied in tool kit.
TIRE PRESSURE (COLD)
MIN.
Maxxis C e r os
MAX.
124 kPa (18 PSI)
NOTE: A flat may occur. Therefore, it
is recommended to carry a tire pump
and a repair kit.
Tire Inspection
Check tire for damage and wear. Re-
place if necessary.
82
______________