Can-Am Commander Electric LSV Operator'S Manual Download Page 68

Page: 68 / 114

SPECIAL PROCEDURES

What to do if Vehicle Rolled
Over

Abrupt maneuvers, sharp turns, side
hilling or accident may cause vehicle to
rollover.

Should the vehicle roll over, verify no
components were damaged and bat-
tery connections are still locked in.
Follow

PRE-RIDE INSPECTION

proce-

dures and restart vehicle.

If components were damaged, have
vehicle transported to your nearest
Can-Am dealer.

WARNING

Never operate vehicle if damaged.

WARNING

After any accidents or impact,
have your batteries inspected and
your battery voltage checked by
your nearest Can-Am dealer.

What to do if Vehicle is
Submerged

Should the vehicle become immersed,
it will be necessary to have it trans-
ported to an authorized Can-Am dealer
as soon as possible.

NOTICE

Never turn the switch to

one of the ON positions until vehicle
is inspected.

_______________

Summary of Contents for Commander Electric LSV



















































































































Search results

Summary of Contents for Commander Electric LSV

Reviews:

Related manuals for Commander Electric LSV

Brands by name

Popular brands

Can-Am Commander Electric LSV, Operator'S Manual

Search results

Summary of Contents for Commander Electric LSV

Reviews:

Related manuals for Commander Electric LSV

Brands by name

Popular brands