Can-Am Commander Electric LSV, Operator'S Manual

Page: 59 / 114

EQUIPMENT
WARNING
The passenger seat belt is not
monitored. The driver is respon-
sible of the passenger safety and
should ensure the passenger buck-
les the seat belt.
Fastening and Adjusting the Seat
Belt
Insert the seat belt latch plate into the
buckle, then pull the belt to ensure it is
properly locked.
Position the belt as low as possible
across your hips. Then, pull the belt
against your shoulder for a snug fit.
NOTE: Slide the latch as required to
adjust the seat belt.
WARNING
Wear seat belt properly. Make sure
it is not twisted or defective.
To release the seat belt, push on the
buckle button.
11) Driver Seat
The driver's seat offers fore and aft ad-
justments.
To adjust seat, move the seat lever to
unlock the seat. Release the lever to
lock the seat into desired position.
WARNING
Never adjust the seat position
while driving.
The driver's seat can be removed eas-
ily:
– Tilt seat forward by releasing latch
between seat cushion and backrest.
– Pull seat upwards.
Some batteries are located under the
driver's seat.
tmo2012-005-005_a
1. Battery location
12) Passenger Seat
The passenger seat is not adjustable.
The passenger seat can be tilted for-
ward for removal by releasing the latch
located between the seat and the back-
rest. Once tilted forward the seat can
be removed by pulling upwards.
NOTE: A battery pack is located under
the passenger seat.
WARNING
Batteries should be serviced by an
authorized Can-Am dealer.
tmo2012-005-019_a
1. Battery pack
13) Winch (Option)
The winch can be actuated inside the
vehicle using the winch control switch
on the upper console or with the in-
cluded remote control.
56
______________