Can-Am Commander Electric LSV, Operator'S Manual

Page: 86 / 114

MAINTENANCE PROCEDURES
WARNING
Do not rotate tires. The front and
rear tires have a different size. The
left and right tires have different
unidirectional tread patterns.
Tire Replacement
Tires replacement should be per-
formed by an authorized Can-Am
dealer.
WARNING
– Replace tires only with the same
type and size as original tires.
– For unidirectional tread pat-
tern, ensure that the tires are
installed in the correct direction
of rotation.
– Tires should be replaced, by an
experienced person, in accor-
dance with tire industry stan-
dards and tools.
Suspensions
Front Suspension Lubrication
Use SUSPENSION GREASE (P/N 293
550 033) or an equivalent.
Lubricate front A-arms.
There are three grease fittings on each
A-arm oriented downwards.
tmo2011-001-064_a
TYPICAL - FRONT SUSPENSION
1. Grease fittings
Suspension Inspection
See an authorized Can-Am dealer if any
problem is detected.
Shock Absorbers
Inspect shock absorber for leaks,
bump stop wear out or other damages.
Verify fasteners are still well tightened.
Front A-Arms
Check A-arms for cracks, bending or
other damages.
Rear Trailing Arms
Check trailing arms for distortion,
cracks or bending.
Brakes
Brake Fluid Reservoir Level
Verification
With vehicle on a level surface, check
brake fluid in reservoir for proper level.
Brake fluid level should be between
MIN.and MAX. marks.
tmo2011-001-083_a
TYPICAL
1. MIN
2. MAX
NOTE: A low level may indicate leaks
or worn brake pads. See an authorized
Can-Am dealer.
Adding Brake Fluid
Remove the filler cap.
_______________
83