Can-Am Commander Electric LSV, Operator'S Manual

Page: 61 / 114

EQUIPMENT
tmo2011-001-014
CARGO AREA WITHOUT FLOOR/
SEPARATOR
The lower section can be further split
into two subsections by inserting a ply-
wood piece into the vertical slots.
17) Cargo Box Tilt Release
Handles
The latching mechanism of the cargo
box can be actuated from either side of
the vehicle through a release handle.
tmo2011-001-020_a
1. Cargo box release handle
Refer to
CARRYING LOADS
in the
SAFETY INFORMATION section.
18) Anchoring Hooks
To provide anchoring point in order
to secure cargo inside the cargo box,
4 anchoring hooks are located inside
the cargo area.
19) Upper Tailgate
The upper section of the cargo box can
be closed with a tailgate.
tmo2011-001-008_a
TYPICAL - CARGO BOX UPPER SECTION
1. Floor section separator
2. Upper tailgate
NOTICE
Do not exceed 100 kg
(220 lb) of weight on the upper tail-
gate during loading or unloading.
Always close the upper tailgate be-
fore operating to reduce the risk of
loss of load.
Upper Tailgate Removal
The upper tailgate can easily be re-
moved by inclining and pulling out of
hinges, then removing the retaining
cables.
tmo2011-001-016_a
TYPICAL
1. Upper tailgate hinge
58
______________