Can-Am Commander Electric LSV, Operator'S Manual

Page: 79 / 114

MAINTENANCE PROCEDURES
This section includes instructions for
basic maintenance procedures listed
in the
MAINTENANCE SCHEDULE
. If
you have the necessary mechanical
skills and the required tools, you can
perform these procedures. If not, see
your authorized Can-Am dealer.
Other important items in the
MAIN-
TENANCE SCHEDULE
that are more
difficult and require in-depth technical
knowledge or special tools are best
performed by your authorized Can-Am
dealer.
WARNING
Unless otherwise indicated, al-
ways turn power switch to the OFF
position and remove key before
performing any maintenance.
WARNING
Should removal of a locking de-
vice be required (e.g. lock tab,
self-locking fastener, etc.) , always
replace it with a new one.
Front and Rear Differential
Oil
Front Differential Oil Level
Verification
Clean filler plug prior to checking oil
level.
tmo2012-005-029_a
FRONT RIGHT SIDE OF VEHICLE
1. Filler plug
Place the vehicle on a level surface.
Select PARK position.
Check oil level by removing filler plug.
Oil level must be 20 mm (3/4 in) below
threads.
It is possible to verify the oil level by in-
serting a wire with a 90° bend through
the oil filler hole.
Reinstall filler plug with a NEW sealing
ring.
TORQUE
FILLER
PLUG
65 N•m ± 5 N•m
(45 lbf•ft ± 5 lbf•ft)
Front Differential Oil Replacement
Place vehicle on a level surface. Set
shift lever in park position.
From underneath of vehicle, clean
drain plug area.
tmo2012-005-027_a
1. Drain plug access hole
Place a drain pan under the front differ-
ential.
Remove drain plug.
Unscrew filler plug.
76
______________