Can-Am Commander Electric LSV Operator'S Manual Download Page 84

Page: 84 / 114

MAINTENANCE PROCEDURES

tmo2011-001-116_a

1. Tail light
2. Light bulb and socket

Push the bulb in and hold while turning
counterclockwise to release.

Installation is the reverse of the re-
moval procedure.

Position Lights Bulbs Replacement

Pull bulb out.

Installation is the reverse of removal.

Drive Shaft Boot and
Protector

Drive Shaft Boot and Protector
Inspection

Visually inspect drive shaft protectors
and boots conditions.

Check protectors for damage or rub-
bing against shafts.

Check boots for cracks, tears, leaking
grease, etc.

Repair or replace damaged parts as
necessary.

tmo2012-005-032_a

FRONT OF VEHICLE - WHEEL REMOVED
FOR CLARITY

1. Inner drive shaft boots
2. Outer drive shaft boot

tmo2012-005-033_a

REAR OF VEHICLE - WHEEL REMOVED FOR
CLARITY

1. Inner drive shaft boot
2. Outer drive shaft boot

Wheel Bearing

Wheel Bearing Inspection

Lift and support vehicle. Refer to

LIFT-

ING AND SUPPORTING THE VEHICLE

VEHICLE INFORMATION SECTION

Push and pull the wheels from the up-
per edge to feel the play.

See an authorized Can-Am dealer if
there is any play.

_______________

Summary of Contents for Commander Electric LSV



















































































































Search results

Summary of Contents for Commander Electric LSV

Reviews:

Related manuals for Commander Electric LSV

Brands by name

Popular brands

Can-Am Commander Electric LSV, Operator'S Manual

Search results

Summary of Contents for Commander Electric LSV

Reviews:

Related manuals for Commander Electric LSV

Brands by name

Popular brands