Can-Am Commander Electric LSV, Operator'S Manual

Page: 16 / 114

PRE-RIDE INSPECTION
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Check if seats are properly latched.
Check side nets for any damage. Have
the nets replaced if any damage is found.
Fasten both side nets and confirm that they latch
securely. Use the adjustment strap to tighten the side net
as required.
Seats, side nets
and seatbelts
Check seatbelts for any damage. Fasten seatbelts and
confirm that they latch securely.
Accelerator pedal
Press on the accelerator pedal a few times to ensure it
operates freely and it returns to the rest position when
released.
Brake pedal
Press down on the brake pedal and make sure you feel
firm resistance and that it fully returns to position when
released.
Steering
Check if steering operates freely by completely turning it
from side to side.
Mirrors Adjust mirrors to your preference
Items to be Checked in Key ON position
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Check operation of indicator lamps in gauge (during first
few seconds of key ON).
Gauge
Check for messages in gauge.
Check cleanliness of headlights, taillights and reflectors.
Check operation of headlights (high and low beams), and
brake lights.
Lights and reflectors
Check operation of hazard warning lights, turn signals and
positions lights (if applicable)
Differential switch
Verify differential switch indicator lights cycle though
when differential switch is pressed.
Horn
Check horn operation.
Shift lever Check operation of shift lever (P, R, N, H and L).
2WD/4WD selector Check operation of 2WD/4WD selector.
________
SAFETY INFORMATION
________
13