Can-Am Commander Electric LSV, Operator'S Manual

Page: 44 / 114

PRIMARY CONTROLS
tmo2011-001-001_a
1. Brake pedal
2. Accelerator pedal
To decrease vehicle speed or to stop
vehicle, press down the brake pedal
with your right foot.
The brake pedal is spring loaded and
should return to rest position when not
pressed.
3) Accelerator Pedal
The accelerator pedal is located on the
right side of the brake pedal.
The accelerator pedal controls the ve-
hicle speed when the power switch is
turned to either ON positions and shift
lever is in one of the following posi-
tions:
– Reverse (R)
– High range (H)
– Low range (L)
.
tmo2011-001-001_a
1. Brake pedal
2. Accelerator pedal
To increase or maintain vehicle speed,
press on the accelerator pedal with
your right foot.
To decrease vehicle speed, release the
accelerator pedal.
The accelerator pedal is spring loaded
and should return to rest position (idle)
when not pressed.
NOTE: The accelerator pedal should
never be disassembled.
4) Shift Lever
The shift lever is located on the lower
console.
The shift lever has 5 possible positions.
_______________
41