Can-Am Commander Electric LSV, Operator'S Manual

Page: 82 / 114

MAINTENANCE PROCEDURES
MAIN FUSE BOX
NO DESCRIPTION RATING
F1 Lamp relay (RL) 20 A
F2 Tail lamp relay (RT) 20 A
F3 Bypass Drive (BP1) 10 A
F4 Main Relay (RM) 20 A
F5 Fuse key (FK) 5 A
F6 Fuse speedo (FS) 15 A
F7 Fuse lamp (FL) 20 A
F8 Fuse CE kit (FCE) 5 A
F9
Fuse accessory (FACC)
5 A
F10 Fuse outlet 2 (FDC2) 15 A
F11 Fuse outlet 1 (FDC1) 15 A
F12 Fuse unswitched (FU) 15 A
F13
Fuse VCM low power
(FVCM)
5 A
F14
Fuse bypass Drive
(FBP1)
10 A
NOTE: Fuses are identified inside fuse
box cover.
Lights
Always check light operation after re-
placement.
Headlight Replacement
NOTICE
Never touch glass portion
of a halogen bulb with bare fingers,
it shortens its operating life. If glass
is touched, clean it with isopropyl al-
cohol which will not leave a film on
the bulb.
Unplug connector from bulb.
vmr2007-050-006_a
TYPICAL
Rotate bulb.
vmr2007-050-007_a
TYPICAL
Pull out bulb.
tmo2011-001-114_a
1. Light bulb socket
2. Light bulb
Properly reinstall removed parts in the
reverse order of their removal.
Validate headlights operation.
_______________
79