Cambium Networks PTP 450 Series, Configuration Manual

Page: 440 / 649

Chapter 3: Operation System statistics
Page
3-40
Transmit Unicast Data
Count
Total amount of unicast packets transmitted from the radio
Transmit Broadcast
Data Count
Total amount of broadcast packets transmitted from the radio
Transmit Multicast
Data Count
Total amount of multicast packets transmitted by the radio
Receive Unicast Data
Count
Total amount of unicast packets received by the radio
Receive Broadcast
Data Count
Total amount of broadcast packets received by the radio
Receive Multicast
Data Count
Total amount of multicast packets received by the radio
Transmit Control
Count Amount of radio control type messages transmitted (registration requests
and grants, etc.)
Receive Control
Count Amount of radio control type messages received (registration requests and
grants, etc.)
In Sync Count Number of times the radio has acquired sync. When GPS synchronization is
used it is number of times GPS sync acquired. For the SM, it
i
s the number of
times the SM successfully obtained sync with an AP.
Out of Sync Count Number of times the radio lost same sync lock
Overrun Count Number of times FPGA frame has overrun its TX Frame
Underrun Count Number of times FPGAs TX Frame aborted prematurely
Receive Corrupt Data
Count
Number of times a corrupt packet has been received at the FPGA.
Receive Corrupt
Control Data Count Number of times a corrupt control data packet has been received at the
FPGA.
Receive Bad
Broadcast Control
Count
Number of times the radio has received an invalid control message via
broadcast (SM only).
Rcv LT Start Number of Link Test Start messages received. A remote radio has requested
that this radio start a link test to it.
Rcv LT Start HS Number of Link Test Start Handshake messages received. This radio
requested that a remote radio start a link test and the remote radio has sent
a handshake back acknowledging the start.
Rcv LT Result This radio received Link Test results from the remote radio under test. When
this radio initiates a link test, the remote radio will send its results to this
radio for display.