Cambium Networks PTP 450 Series, Configuration Manual

Page: 319 / 649

Chapter 1: Configuration Configuring a RADIUS server
Page
1-291
Cambium-Canopy-UserLevel 26.161.50 integer N 1-Technician, 2-
Installer, 3-
Administrator
Account > Add User > Level 0 32 bits
Cambium-Canopy-DHCP-State 26.161.31 integer N 1-Enable
Configuration > IP > DHCP state 1 32 bits
Cambium-Canopy-
BCASTMIRUNITS 26.161.28 integer N
Configuration > QoS >
Broadcast Downlink CIR 0 32 bits
Cambium-Canopy-
ConfigFileImportUrl 26.161.29 string N
Configuration > Unit Settings 0 32 bits
Cambium-Canopy-
ConfigFileExportUrl
26.161.30 string N
Configuration > Unit Settings 0 32 bits
Cambium-Canopy-UserMode 26.161.51 integer N 1=Read-Only 0=Read-
Write
Account > Add User > User
Mode 0 32 bits
(*) Contains key for encrypting packets sent by the NAS to the remote host (for Microsoft
Point-to-Point Encryption Protocol).
Note
VSA numbering:
26 connotes Vendor Specific Attribute, per RFC 2865
26.311 is Microsoft Vendor Code, per IANA
Configuring RADIUS server for SM configuration using Zero Touch
feature
The RADIUS VSA (Vendor Specific Attributes) is updated for Zero Touch feature. This feature
enables the ability for a SM to get its configuration via RADIUS VSA. The RADIUS VSA is
updated for an URL which points to the configuration file of SM (see
Table 91 for list of VSA).
The RADIUS will push the vendor specific attribute to SM after successful authentication. The
VSA contains URL of config file which will redirect SM to download configuration. If there is
any change in SM confirmation, the SM will reboot automatically after applying the
configuration.