Cambium Networks PTP 450 Series, Configuration Manual

Page: 200 / 649

Chapter 1: Configuration Configuring radio parameters
Page
1-172
Attribute Meaning
Frequency Carrier Specify the frequency for the module to transmit. The default for this
parameter is None. For a list of channels in the band, see the drop-down
list on the radio GUI.
Channel Bandwidth The channel size used by the radio for RF transmission. The setting for
the channel bandwidth must match between the AP and the SM. The
supported Channel Bandwidths are 5, 7, 10 and 20 MHz.
Cyclic Prefix
See Table 46 PMP 450m AP Radio attributes - 5 GHz on page 1-147.
Frame Period
Color Code
Subscriber Color Code
Rescan (When not on a
Primary Color Code)
Subscriber Color Code
Wait Period for Idle
Installation Color Code
MIMO Rate Adapt
Algorithm
Downlink Maximum
Modulation Rate
Uplink Maximum
Modulation Rate
Max Range
See Table 46 PMP 450m AP Radio attributes - 5 GHz on page 1-147.
Downlink Data
Contention Slots
(a.k.a. Control Slots)
Auto Contention
Broadcast Repeat Count
Transmitter Output
Power
See Table 48 PMP 450i AP Radio attributes - 5 GHz on page 1-157.
External Gain
SM Receive Target Level
See Table 46 PMP 450m AP Radio attributes - 5 GHz on page 1-147 Multicast VC Data Rate
Multicast Repeat Count