Cambium Networks PTP 450 Series, Configuration Manual

Page: 115 / 649

Chapter 1: Configuration General configuration
Page
1-87
Caution
This parameter governs the timeout interval, even if a router in
the system has a longer timeout interval. The default value of
this field is
25 (minutes).
An inappropriately low Bridge Entry Timeout setting may lead
to temporary loss of communication with some end users.
Bridging Functionality See Table 22 General page attributes – PMP 450i AP on page 1-72
Frame Timing Pulse
Gated
If this BHS extends the sync pulse to a BH master or an BHM, select either
Enable—If this BHS loses sync from the BHM, then do not propagate a sync
pulse to the BH timing master or other BHM. This setting prevents
interference in the event that the BHS loses sync.
Disable—If this BHS loses sync from the BHM, then propagate the sync pulse
to the BH timing master or other BHM.
Multicast Destination
Address See Table 22 General page attributes – PMP 450i AP on page 1-72
Latitude
Longitude
Height
See Table 22 General page attributes – PMP 450i AP on page 1-72