Cambium Networks PTP 450 Series, Configuration Manual

Page: 83 / 649

Chapter 1: Configuration Configuring IP and Ethernet interfaces
Page
1-55
Active Configuration,
Default Port VID This is the value of the parameter of the same name, configured above.
Active Configuration,
MAC Address VID
Map This is the listing of the MAC address VIDs configured in Port VID MAC
Address Mapping.
Active Configuration,
Management VID This is the value of the parameter of the same name, configured above.
Active Configuration,
SM Management VID
Pass-Through This is the value of the parameter of the same name, configured above.
Active Configuration,
Dynamic Aging
Timeout This is the value of the VLAN Aging Timeout parameter configured above.
Active Configuration,
Allow Learning Yes is displayed if the value of the Dynamic Learning parameter above is
Enabled. No is displayed if the value of Dynamic Learning is Disabled.
Active Configuration,
Allow Frame Type This displays the selection that was made from the drop-down list at the
Allow Frame Types parameter above.
Active Configuration,
QinQ This is set to Enabled if VLAN Port Type is set to QinQ, and is set to
Disabled if VLAN Port Type is set to Q.
Active Configuration,
QinQ EthType This is the value of the QinQ EtherType configured in the AP.
Active Configuration,
Allow QinQ Tagged
Frames This is the value of Accept QinQ Frames, configured above.
Active Configuration,
Current VID Member
Set, VID Number This column lists the ID numbers of the VLANs in which this module is a
member, whether through assignment or through dynamic learning.
Active Configuration,
Current VID Member
Set, Type For each VID number in the first column, the entry in this column correlates
the way in which the module became and continues to be a member:
Permanent—This indicates that the module was assigned the VID number
through direct configuration by the operator.
Dynamic—This indicates that the module adopted the VID number through
enabled dynamic learning, when a tagged packet from a SM behind it in the
network or from a customer equipment that is behind the SM in this case,
was read.
Active Configuration,
Current VID Member
Set, Age For each VID number in the first column of the table, the entry in this column
reflects whether or when the VID number will time out:
Permanent type - Number never times out and this is indicated by the digit
0.