Cambium Networks PTP 450 Series, Configuration Manual

Page: 168 / 649

Chapter 1: Configuration Configuring security
Page
1-140
•
HTTP Only – provides non-secured web access. The radio to be
accessed via http://<IP of Radio>.
• HTTPS Only – provides a secured web access. The radio to be accessed
via https://<IP of Radio>.
•
HTTP and HTTPS – If enabled, the radio can be accessed via both http
and https.
SNMP This option allows to configure SNMP agent communication version. It can
be selected from drop-down list :
• SNMPv2c Only – Enables SNMP v2 community protocol.
• SNMPv3 Only – Enables SNMP v3 protocol. It is secured communication
protocol.
• SNMPv2c and SNMPv3 – It enables both the protocols.
Telnet This option allows to Enable and Disable Telnet access to the Radio.
FTP This option allows to Enable and Disable FTP access to the Radio.
TFTP This option allows to Enable and Disable TFTP access to the Radio.
Site Information
viewable to Guest
Users This option allows to Enable or Disable displaying site information with
Guest users.
Site Name Specify a string to associate with the physical module.
Site Contact Enter contact information for the module administrator.
Site Location Enter information about the physical location of the module.
Enable Security
Banner during Login Enable: The Security Banner Notice will be displayed before login.
Disable: The Security Banner Notice will not be displayed before login.
Security Banner
Notice User can enter ASCII (0-9a-zA-Z newline, line-feed are allowed) text up-to
1300 characters.
User must accept
security banner
before login Enable: login area (username and password) will be disabled unless user
accepts the security banner.
Disable: User can’t login to radio without accepting security banner.
Security page –450 Platform Family BHS
The Security page of 450 Platform Family BHS is explained in Table 43.