background image

Page 7 / 48

NR, NR4 Rev. 13 - Operating Instructions

GB

THIS INSTRUCTION MANUAL IS THE PROPERTY OF

CALPEDA S.P.A. ANY REPRODUCTION, EVEN IF

PARTIAL, IS FORBIDDEN

SUMMARY

General information . . . . . . . . . . . . . . . . . . . . . . . 7

TECHNICAL DESCRIPTION . . . . . . . . . . . . . . . . 7

TECHNICAL FEATURES. . . . . . . . . . . . . . . . . . . 8

4  

SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5. 

TRANSPORTATION AND HANDLING . . . . . . . . 8

6. 

INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . 9

7. 

START-UP AND OPERATION . . . . . . . . . . . . . . 9

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . 10

DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

10 

SPARE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . 11

11 

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . 11

12 

ANNEXES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

12.1  Dimensions and weights . . . . . . . . . . . . . . . . . . 42
12.2  Designation of parts . . . . . . . . . . . . . . . . . . . . . . 44
12.3  Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Copy of the declaration of conformity . . . . . . . . . . . . . 47

1 GENERAL INFORMATION

Before  using  the  product  carefully  read  the  information
contained  in  this  instruction  manual,  the  manual  should
be kept for future reference.
Italian is the original language of this instruction manual,
this language is the reference language in case of discre-
pancies in the translations.
This  manual  is  part  of  the  essential  safety  requirement
and must be retained until the product is finally de-com-
missioned.
The customer, in case of loss, can request a copy of the
manual by contacting Calpeda S.p.A. or their agent, spe-
cifying the type of product data shown on the label of the
machine (see 2.3 Marking)
Any  changes,  alterations  or  modifications  made  to  the
product or part of it, not authorized by the manufacturer,
will revoke the "CE declaration" and warranty.

This appliance should not be operated

by children younger than 8 years, peo-

ple  with  reduced  physical,  sensory  or

mental  capacities,  or  inexperienced

people  who  are  not  familiar  with  the

product,  unless  they  are  given  close

supervision  or  instructions  on  how  to

use it safely and are made aware by a

responsible  person  of  the  dangers  its

use might entail.

Children  must  not  play  with  the

appliance.

It  is  the  user's  responsibility  to  clean

and  maintain  the  appliance.  Children

should  never  clean  or  maintain  it

unless they are given supervision.

Do  not  use  in  ponds,  tanks  or  swim-

ming pools or where people may enter

or come into contact with the water.

Read  carefully  the  installation  section

which sets forth:

- The maximum  permissible structural

working pressure (chapter 3.1). 

- The  type  and  section  of  the  power

cable (chapter 6.5). 

- The type of electrical protection to be

installed (chapter 6.5).

1.1 Symbols

To  improve  the  understanding  of  the  manual,  below  are
indicated the symbols used with the related meaning.

Information  and  warnings  that  must  be  observed,
otherwise  there  is  a  risk  that  the  machine  could
damage or compromise personnel safety.
The  failure  to  observe  electrical  information  and
warnings,  could  damage  the  machine  or
compromise personnel safety.
Notes and warnings for the correct management
of the machine and its parts.

Operations  that  could  be  performed  by  the  final
user.  After  carefully  reading  of  the  instructions,  is
responsible  for  maintenance  under  normal
conditions.  They  are  authorized  to  affect  standard
maintenance operations.
Operations  that  must  be  performed  by  a  qualified
electrician.  Specialized  technician  authorised  to
affect all electrical operations including maintenance.
They are able to operate with in the presence of high
voltages.
Operations that must be done performed by a qualified
technician.  Specialized  technician  able  to  install  the
device,  under  normal  conditions,  working  during
"maintenance",  and  allowed  to  do  electrical  and
mechanical interventions for maintenance. They must be
capable  of  executing  simple  electrical  and  mechanical
operations related to the maintenance of the device.
Indicates  that  it  is  mandatory  to  use  individual
protection devices 

- hand protection.

Indicates  that  it  is  mandatory  to  use  individual
protection devices 

- eye protection.

Operations  that  must  be  done  with  the  device
switched  off  and  disconnected  from  the  power
supply.
Operations  that  must  be  done  with  the  device
switched on.

1.2 Manufacturer name and address

Manufacturer name: Calpeda S.p.A.
Address: Via Roggia di Mezzo, 39
36050 Montorso Vicentino - Vicenza / Italia
www.calpeda.it

1.3 Authorized operators

The product is intended for use by expert operators divi-
ded into end users and specialized technicians. (see the
symbols above).

It's  forbidden,  for  the  end  user,  carry  out
operations  which  must  be  done  only  by
specialized  technicians.  The  manufacturer
declines  any  liability    for  damage  related  to  the
non-compliance of this warning.

1.4 Warranty

For  the  product  warranty  refer  to  the  general  terms  and
conditions of sale. 

i

OFF

ON

i

IST NR_ED13_2017_MXS 11_03con gall  17/10/17  08:58  Pagina 7

Summary of Contents for NR

















































Reviews: