California Access M665S, User Manual

Page: 186 / 190

Windows XP Information
D - 42 PC Camera Module
D
PC Camera Audio Setup
If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in
Windows (see Figure D - 20 on page D - 43 ).
1. Go to the Start menu and point to Settings (or just click Control Panel ) and click Control Panel , then double-
click the Sounds & Audio Devices icon ( Sounds, Speech, and Audio Devices in Category View).
2. Click Advanced in the Volume > Device volume tab.
3. Click Options and scroll down and click Properties .
4. Select HD Audio rear input (for a microphone plugged in to the microphone-in jack)/ HD Audio Front Mic (for
the built-in microphone) from the Mixer device menu and click OK (make sure there is a tick in the Microphone
tick box).
5. Click Recording (button) and click OK .
6. Boost the volume in the Microphone section as high as it will go (make sure there is a tick in the Select tick box
if you have selected HD Audio rear input) .
7. Close the open windows.
8. You can also boost the microphone from the Mixer in the VIA Audio Deck menu (see page D - 9 ).
9. Run the BisonCap application program from the Start > Programs/All Programs > BisonCam menu (or press
the application button ).
10. Go to the Devices menu heading and select HD Audio rear input OR HD Audio front mic (it should have a
tick alongside it).
11. Go to the Capture menu heading and select Capture Audio (it should have a tick alongside it).