![background image](http://html1.mh-extra.com/html/caire/saros-3000/saros-3000_service-manual_482620036.webp)
Service Manual
36 | MN260 B
7.7.8 ATF & COMPRESSOR / TANK ASSEMBLY REMOVAL
7.7.8.1 Remove Kapton Tape (2696) from the Muffler Assembly and left strut (9779-SEQ), as shown in figure.
Cut cable
tie here
Muffler Assy
2x3” tape
Figure 7-33. Kapton Tape
7.7.8.2 Remove exhaust tube and ATF to product tank tubing. Cap the connection port on the ATF that is exposed when the tub-
ing is removed.
Exhaust
Tube
Figure 7-34. Exhaust tube
7.7.8.3 Cut and remove 2 Cable Ties (6968-SEQ) as shown on
figure below.
NOTE: Leave the cable tie closest to the Compressor/Product Tank
Assembly Intact.
Figure 7-35. Cable Ties
7.7.8.4 Remove the silicone tubing from the ATF, leaving the
tubing attached to the Compressor Assembly.
NOTE: May need to carefully pry tubing from ATF ports with a
tool.
Figure 7-36. Silicone tubing
Summary of Contents for SAROS 3000
Page 56: ...Service Manual 56 MN260 B NOTES...