Service Manual
34 | MN260 B
7.7.6 BATTERY CABLE REMOVAL (21494875)
7.7.6.1 Pull out the wires from the grommets on the bulkhead of
the Compressor as shown in figure below.
Figure 7-27. Hall Effect Sensor
7.7.6.2 Remove the two large wires (Battery Connector Cable)
thru the middle Bulkhead as shown in figure below.
7.7.6.3 Remove the Wire Sleeve with the wires thru the Bulk-
head.
Figure 7-28. Remove Wire Sleeve
7.7.6.4 Cut and remove the 6 Cable Ties (part# 6968-SEQ) on the Side Rail & Cable Ties that group the Cable bundle together.
CAUTION: Do not cut wires.
Figure 7-29. Cable Ties and Rails
Hall Effect
Sensor
Hall Effect
Sensor
ATF power & ATF
thermistor wire
connector cable
Battery Connector
Cable (21494875)
3” wire sleeve
(9638-SEQ)
Summary of Contents for SAROS 3000
Page 56: ...Service Manual 56 MN260 B NOTES...