MN260 B | 27
Service Manual
7.6 REMOVAL PROCEDURES
7.6.1 BATTERY INTERFACE PLATE, RAIN GUARD, AND SLEEVE
7.6.1.1 Remove the three screws (Part# 9914-11-SEQ) and re-
move the Battery Interface Plate (Part# SP9939-1-SEQ ).
Figure 7-2. Removal of the three BIP screws
7.6.1.2 Removing the two screws (Part# 9960-15-SEQ) from the
Rain Guard (Part# 21494877)
Screws
Part#
9960-15-SEQ
Rain Guard
Part# 21494877
Figure 7-3. Removal of the three Rain Guard Screws
7.6.1.3 Disconnect wires from battery bridge board and detach
the Rain Guard (Part# 21494877) from the Alignment Ring
Rain Guard
Part# 21494877
Figure 7-4. Removal of the Rain Guard
7.6.1.4 Remove the Ring SLEEVE (Part# 9928-SEQ) to expose
wiring.
NOTE: Ensure both O-Rings (Part # 9374-SEQ) remains with the
Ring Sleeve.
9374-SEQ 9928-SEQ
Figure 7-5. Removal of Sleeve Alignment Ring
Battery Interface
Plate Part
# SP9939-1-SEQ
Screws
Part# 9914-11-SEQ
Summary of Contents for SAROS 3000
Page 56: ...Service Manual 56 MN260 B NOTES...