MN260 B | 49
Service Manual
7.8.10 INLET CAP INSTALLATION (SP9756V2-SEQ)
7.8.10.1 Place O-Ring in the Ring Sleeve.
O-Ring
(9374-SEQ)
Ring Sleeve
(9928-SEQ)
Figure 7-77. O-ring attached
7.8.10.2 Align and slide the three O-Rings in the Ring Sleeve
over the three struts.
NOTE: Verify arrow points towards the inlet cap.
Figure 7-78. Arrows on O-ring
7.8.10.3 Place the Extended Top Cap (SP9756V2-SEQ) over the
STRUTS so that the LCD Display is lined up with the Mem-
brane Panel Window.
9928-SEQ
Figure 7-79. Inlet Caps
7.8.10.4 Connect the Breath Detect Tube.
breath
detect
tube
Figure 7-80. Breach Tube
Summary of Contents for SAROS 3000
Page 56: ...Service Manual 56 MN260 B NOTES...