Document type:
Title:
Revision date:
Revision:
User's Manual (MUT)
Mod. SY2527, Universal Multichannel Power Supply System
27/11/2000
0
NPO:
Filename:
Number of pages:
Page:
00103/97:2527y.MUTx/00
SY2527USERMANUAL_REV0.DOC
84
64
Fig. 7.18 – Board Upgrade pop-up Window
In order to upgrade the firmware of the boards, it is now necessary to download the
firmware on the board by using the
Download
Selected File on Board
command. In
order to upgrade the firmware on the board, follow these steps:
1. select the file you want to download by means of the arrows in the upper area of
the Board Upgrade window;
2. Select the
Download Selected File on Board
command by means of the TAB
key and then press enter: as this command is entered, the software will ask you
for the slot where to download the firmware;
3. type the number of the
Slot
where the board you want to upgrade is plugged
into, select OK and press ENTER: some messages displayed at the bottom of
the window will indicate the on-going operations.
To erase a file from the flash memory select the
Delete Selected File
command and
press ENTER.
To exit the Board Upgrade window select the
Exit
command and press ENTER.
